Best Motorcycle Helmets for Claustrophobia

5 Best Motorcycle Helmets for Claustrophobia

Share on facebook
Share on twitter
Share on reddit

Surprisingly, the best motorcycle helmet for claustrophobia results in actual progress. It efficiently breaks two hard nuts here. First and foremost, we must keep in mind that motorcycle riding necessitates the use of safety equipment. One of these devices is an approved helmet. At this moment, the helmet causes another fracture to form. Riders are frequently smothered as a result of a blind spot. It happens as a result of wearing full-face helmets.

However, we can confidently assert that these difficulties are solvable. As a result, the market has the best helmets for motorcyclists who suffer from claustrophobia. To crack the nuts, you’ll need a hammer. Do you believe it’s easy to find those?

But those are not what they appear to be. At this stage, protecting motorcyclists from claustrophobia necessitates the use of unique helmets. Those helmets contain individual and linked elements that give safety and calm emotions.

We did our expert research to choose the best motorcycle helmets for riders with Claustrophobia. If you are in a hurry, then you can check our top 3 best motorcycle helmets for claustrophobia. 

So, without any further delay, let’s begin!

Entry Level


HJC IS-Cruiser Helmet

Mid Range


Dremel Digilab 3D20

High End


AGV Sportmodular Carbon Helmet

1. Bell Bullitt Helmet


  • This helmet has been approved by the Department of Transportation and has received FMVSS certification.
  • You will find this handy helmet to be quite durable and effective in protecting your head from a blow.
  • This variant has been enhanced with the addition of cheek cushions by the manufacturer for increased comfort.
  • This helmet has recently been introduced to the market and comes with a five-year warranty.
  • A number of vents will allow air to travel through the helmet, allowing you to feel more comfortable.


  • Because sunshine protection is missing in this model, it may not be able to withstand direct sunlight.

The Bullitt is built with a low-profile fiber composite shell and a multi-density EPS liner to fulfill contemporary DOT standards while being as similar to the appearance and feel of the original Star as possible. Luxury features like a micro-suede interior with leather trim, metal mesh circular intake vents, a rear exhaust vent, and 3D carved cheek cushions with speaker pockets complement the historic design and propel the Bullitt into the twenty-first century.

The Bell Bullitt, named after the brazen investigator played by legendary actor and motorsport aficionado Steve McQueen in the cult movie Bullitt, is an exercise in design as well as rider safety, breaking the norm and giving a premium vintage choice to the market. Put that antique helmet back on the shelf and pick up a Bullitt to fulfill all of your retro riding fantasies. 


  • Size: The Bullitt is available in three shell sizes and six fitting sizes ranging from XS to 2XL. According to reports, it may be worth attempting a size larger than you are used to — for example, a normal-sized head may fit better inside a large Bell Bullitt than a medium. 
  • Ventilation: Its five metal mesh intake vents provide for a smooth airflow over the head. The lip at the top of the rear vent helps direct air along the top of the head and adds to the overall aerodynamic feel of the helmet. Close the front chin vent from behind.
  • Comfort: The suede lining is intended to provide optimum comfort while still looking at the part, and it appears to work for the majority of individuals. The cheek pads on the Bullitt don’t feel like they take up too much space inside the helmet. Bell’s EPS foam is intended to be lightweight and comfortable, and it appears to function well. 

2. Icon Airflite Helmet


  • The inner sun shield is fog-free.
  • Fog-free face protection that can be changed quickly
  • It has side plates that are removable
  • Breath deflector made of plastic
  • The helmet has a chin curtain
  • Removable Moisture-wicking liner Hydradry
  • Twin channel recessed supervenient cooling system


  • The helmet is quite noisy.

On weekends, the Icon Airflite Helmet may assault corners and combat traffic on weekdays. It makes no difference whether you’re peering through ape hangers or grasping clip-ons. The Icon Air Flite Helmet is unconcerned with what you ride. It only wants to move quickly and appear menacing.

Its chin vent functions to circulate air and frighten, much like a Hannibal Lecter face mask. As you ride down the street, the intake vents snort in so much fresh air that you can smell pedestrians’ terror. They will not cross the street in front of you. A drop-down interior sun visor lets you control the sun or slip into the incognito mode with the flip of a switch. 

The injection-molded polycarbonate shell is robust enough to absorb energy while remaining intact if you accidentally headbutt anything substantial. Its Hydradry lining wicks moisture away from your head, keeping it dry and comfortable.


  • Sun Visor: In the Airflite, the sun visor is controlled by a slider located directly beneath the left-hand visor pivot. We discovered that it slides down well and was quite simple to use.
  • Comfort and Sizing: The Icon Airflite is available in three different shell sizes, as well as in fitting sizes ranging from XS to XXXL. A detachable and washable lining made of Icon’s standard Hydradry material, which is moisture-wicking and breathable, is included on the inside.
  • Ventilation: The chin guard has a large central vent that conducts air around the mouth and up onto the visor. The Airflite’s primary visor actually slides down to cover the chin guard vent, with the perforations in the visor letting air through even when fully closed.

3. Shoei GT-Air II Helmet


  • The chin curtain keeps the wind out and lowers the noise.
  • Cheek pads may be replaced or removed for cleaning.
  • Interlocking mechanism made of 100 percent stainless steel that is eyeglass compatible.
  • The helmet is quick, fluid, and simple to use


  • The helmet lacks a broad lip under the strap to protect the bottom of your chin.
  • The helmet is quite heavy.

The shell design of the new Shoei GT-Air 2 has been refined while remaining faithful to the original’s aerodynamic and stable characteristics. The GT-Air II is equipped with an enhanced ventilation system, as well as a longer QSV-2 drop-down sun visor, which gives 5mm additional coverage for immediate sun relief.

The GT Air 2 includes a tiny ratchet chin strap, just like its flip-up cousin, the Neotec 2. It is also intended to interact with the GT-Air II specialized SRL 2 Bluetooth Communication System by Sena, allowing for a clean and low-profile installation. 


  • Ventilation System: Upper air intake vent redesigned and positioned to optimize air volume into the helmet interior. The increased size of the bottom intake vent decreases shields fogging and enhances ventilation. Even with gloved hands, upper and lower intake vents are simple to operate.
  • Advanced Integrated Matrix (AIM): High-performance fiber materials are mixed with elastic organic fibers to generate an ultra-lightweight, stiff, and robust shell structure.
  • Aerodynamic Shell Design: Aerodynamic characteristics have been optimized through intensive wind tunnel research and feedback from expert riders. The use of a multi-piece EPS liner improves impact absorption and ventilation. A molded air spoiler lowers drag and lifts while also relieving pressure on the rider’s neck while riding at high speeds.

4. HJC IS-Cruiser Helmet


  • Lightweight Modern Polycarbonate Composite Shell Superior fit and comfort thanks to advanced CAD technology Integrated, pull-down HJ-V4 light-smoked sunscreen quickly deploys
  • Nylex inside is plush and moisture-wicking, with a detachable and washable anti-bacterial lining.
  • DOT Approved nylon strap D-ring retention system


  • The noise level of the helmet is too high.

The HJC IS-Cruiser Helmet has been stripped down to its bare essentials for rugged good aesthetics and pure simplicity. The sunscreen may be deployed without the need for a complicated lever. The natural tendency is to grab little exposed tabs and pull them down, so there is little room for error. 


  • The Lightweight Advanced Polycarbonate Composite (LAPC) Shell makes this a durable option, yet it is also quite light.
  • The HJ-V4 light-smoked sunscreen has an integrated pull-down mechanism that is simple to deploy.
  • A clever and moisture-wicking Nylex interior with a detachable and washable anti-bacterial layer is included as well as an external pocket.
  • D-Ring holding system with nylon straps to make cycling a more enjoyable experience for you.
  • Most significantly, the device has been approved by the Department of Transportation, so you won’t have to worry about your safety.

5. AGV Sportmodular Carbon Helmet


  • The Visor Lock System (VLS) lowers the possibility of unintentional openings.
  • The metal face shield mechanism is meant to have a small surface area, allowing for a better peripheral view and impact performance.
  • The rapid face shield release technology needs no tools and enables quick removal and replacement.
  • Interior fit with no stress
  • The nose guard and wind protector are detachable.


  • The two upper vents might rattle in speed.

Wearers of modular helmets can rejoice! The AGV Sport Modular Carbon Helmet is now here, and it’s ready to accompany you on your journey. The Sportmodular was designed with the AGV Pista GP R in mind, and it has the same level of protection and lightweight construction. The helmet liner is two-sided and reversible, allowing you to choose the level of comfort that is most comfortable for you, depending on the conditions. 

The Pinlock 120 insert lens, which provides race-level anti-fogging performance at your fingertips, is compatible with the GT3 face shield. The metal hardware on the chin bar ensures that the bar is securely closed. Replace the face shield in seconds without the use of a tool. 


  • Ventilation: In the shell of the SportsModular, there is a single chin vent in the chin guard, a single crown vent, and a single exhaust vent. But it’s not always the number of vents that matters; it’s how well they’re constructed. AGV employs a system known as IVS or Integrated Ventilation System.
  • Shield and Sun visor: AGV claims that the SportModular has a 190-degree horizontal field of view, which is the same as the visual range of the human eye. Owners all agree that it has an incredibly wide field of view, which has to be a beneficial thing both on and off the track. 
  • Chin Guard: The Sport Modular’s chin guard includes a metal opening mechanism for optimum robustness and to reduce the possibility of it opening during an impact.

Things To Consider Before Buying The Best Motorcycle Helmet for Claustrophobia

We have compiled information on many features in this section. In reality, these items provide benefits such as the ability to wear a helmet. You will acquire the proper helmet if you carefully evaluate the following qualities.

1. Dimensions and Form

First and foremost, examine the shape and size. One thing is certain: the efficacy of the helmet is dependent on it. In this situation, you must determine the ideal size. Furthermore, the form should be appealing and functional. There are oval, long oval, and more variants.

2. Outside Case

The primary goal of wearing a helmet is safety. It is due to the high incidence of motorcycle accidents. As a result, you must wear such a sturdy helmet. You must first concentrate on the helmet’s exterior shell. It must be difficult to break. This will secure your safety to the greatest extent possible.

3. Ventilation and Visor

Let us now shift our attention to the visor. It is the primary means by which the rider looks out the window. Indeed, the visor should be scratch-resistant. Furthermore, it should be excessively lengthy in order to increase the duration of the view. A cyclist will not experience claustrophobia if the helmet has an adequate ventilation mechanism.

4. Pads that ensure comfort

Seriously, you must not be bothered by wearing a helmet. As a result, on the inside of the helmet, the maker should incorporate a soft and pleasant cushion. It will also come in useful for your head’s safety. Above all, precise cushioning can properly absorb the pressure of cycling.

5. . Standard Quality Certification

You should choose a helmet that has been certified. A decent helmet on the market will have numerous standard certifications. These accolades, in fact, attest to the helmets’ effectiveness. Above all, wearing an approved helmet will help you overcome nervousness. This sort of helmet is an effective safeguard for your safety in this situation.

6. Price

Finally, pricing will be a major consideration element. It must be within your budget. Furthermore, people must be confident in the advantages. They must justify the worth of the trade. They should keep in mind that the producers may charge a hefty price. As a result, they must think about it carefully.


Will a motorcycle helmet progressively soften?

Ans: Of course, it will get looser with time. However, for high-quality helmets, this takes time. You know what? It has cushions and meshes on the inside. These materials are loosened up here by the pressure of the skull.

What color helmet stands out the most?

Ans: Any helmet with a bright color is suitable for riding. Researchers discovered that white is safe in numerous tests. However, if you’re searching for the safest color, yellow or orange are the best options.

How can I keep my hair safe while wearing a helmet?

Ans: It is common for hair to get damaged when riding a bike. In this scenario, you can cover your hair with a cap or scarf. Furthermore, wearing a full-face helmet can reduce the likelihood of hair damage.

Do vents for ventilation reduce the helmet’s strength?

Ans: It’s a completely hazy idea. Typically, manufacturers design to guarantee safety. In this scenario, a vent is an excellent tool for dealing with claustrophobia. It has no effect on the helmet’s strength. 


With any luck, the motorcyclists will now be in a more relaxed position to select the best motorcycle helmet for claustrophobia. The voyage had been excellent up to this point. In reality, your efforts and thorough study have lead you to the most suitable option. 

A helmet, on the other hand, is a piece of equipment that should include a safety function. In addition to this, it must prevent the rider from experiencing a claustrophobic sensation.

If you have any queries, you can ask us in the comment section below. 

We are committed to finding, researching, and recommending the best products. We earn commissions from purchases you make using the retail links in our product reviews. Learn more.

Leave a Comment

Your email address will not be published. Required fields are marked *