As the name implies, a half-helmet covers half of the head and is thus comfortable. Half helmets do not completely cover the head. They are less constricting than a full-face helmet.
A half-helmet is intended to protect your head by allowing for plenty of air. Despite the fact that helmets such as full-face, open-face, and sports bike helmets include vents for appropriate ventilation, the rider might become tired.
As a result, many riders who sweat a lot choose half-helmets over other types of helmets. Furthermore, the half-helmet alleviates the strain produced by other mask helmets.
According to scientific research, few people suffer from headaches as a result of the heavyweight of the helmet, but a half-helmet weighs less and so eliminates the headache problem. These are lightweight and fashionable bike helmets that everyone may wear.
Helmets are required for riders to wear if they want to protect themselves. They are increasingly popular because they provide adequate aeration. Half-helmets are classified into two types based on their design: shield-less half-helmets and shield-protection half-helmets.
In this article, we have listed 5 best half helmets along with the buying guide so that you can make a wise choice. We did our expert research to choose the best products in the category for you. If you are in a hurry, then you can check our top 3 best half helmets.
1. Scorpion EXO Covert Helmet
- Integrated SpeedView internal tinted sun visor with EverClear anti-fog coating in an advanced polycarbonate shell
- It comes with a transparent visor for nighttime driving.
- Kwikwick 2 cloth liner with anti-microbial properties
- EPS with a dual-density
- A front mask with neodymium magnets that is easily detachable is supplied.
- System of ventilation that has been aero-tuned
- Ear Flaps that can be removed
- DOT-approved chinstrap system with double D-rings.
- Many users have complained about the comfort level of the helmet.
- The helmet makes a lot of noise.
Scorpion’s Covert Helmet adds a lot of “but wait, there’s more” to the traditional half shell. They start strong with a programmable ventilation system. They then incorporate a no-frills drop-down sun visor mechanism. One pull on a tab lowers the shades, and another pull on the same tab retracts them; it couldn’t be simpler.
By snapping in a rear bottom sleeve, you can convert your lid into a 3/4 helmet and help quiet some of the screams from your life-saving exhaust. Despite the increased coverage, Scorpion’s Kwikwick lining keeps you focused by directing heat and humidity up to the ventilation ducts, where it is piped out the rear.
You’ll stay as cool as a cucumber. But hold on, there’s more. Attaching the front mask protects your attractive face from bugs and other debris as you go down the freeway. If you regularly need to go from being seen to just being heard, the Scorpion Covert is available for tasks ranging from the twisties to the impossible.
- Safety: The Scorpion Exo Covert is constructed of polycarbonate and comes in two sizes. It has a simple shell structure and material, but it doesn’t imply it won’t provide enough protection.
- Ventilation: The vents on the chin bar are usually open and only have some metal gauze in them to keep flies and other insects out. However, with the area behind the face shield and those vents combined, there is no scarcity of air coming in.
- Sun Visor: It’s essentially a solar visor, yet it pulls down like a conventional face shield and is sealed at the bottom to keep water/wind out, much like a true shield.
2. Bell Rogue Helmet
- The helmet’s material is flexible, sturdy, and light. This keeps the helmet secure but comfortable.
- Only high-end helmets have pockets for communication systems. Bike riders may enhance their biking experience by adding music.
- The helmet’s neck padding prevents neck injuries. It is also readily removed and cleaned.
- The interior is lined with polystyrene, which protects the riders from serious injuries.
- The DOT has validated the helmet, ensuring its quality and authenticity.
- Many consumers have complained about the helmet’s fit.
- The muzzle also causes nose rashes.
If riding a motorcycle isn’t scary enough, channel your inner Bane by donning the Bell Rogue. The Rogue has the appearance of a half-helmet but provides additional protection and comfort, and the adjustable and detachable muzzle not only scares cagers but also shields your face from road debris and weather.
The lightweight composite shell and comfy lining with speaker compatibility give improved riding comfort and convenience. The Rogue provides riders with all the benefits of comparable touring helmets while maintaining an edgy and attractive appearance.
- Lightweight composite shell: The helmet is constructed of a lightweight yet incredibly strong material that keeps the head secure and pleasant. Both of these characteristics are difficult to find in a helmet, but since this helmet is made by Bell, bikers can anticipate outstanding features like this one.
- Completely durable and secure: The helmet is DOT certified and has been tested for transportation by major government authorities. The certification is necessary for bike riders to ensure that the product is genuine and fit to be worn on the streets.
- Innovative and long-lasting muzzle: The helmet has an adjustable and detachable muzzle that can be simply secured in place. It is constructed of German fasteners, therefore there is no need to be concerned since it will not break easily.
- Interior is removable and washable: The neck cushion and shield may be simply removed and cleaned. Sweat, dust, and other pollutants can cause helmets to get quite dirty, thus it is critical to clean the helmet.
The HJC IS-Cruiser Helmet is designed for robust, excellent aesthetics and pure simplicity. The sunsheild is deployed using a simple lever. There’s not much to go wrong here because you naturally grasp little exposed tabs and pull them down. There are no frills or bother.
- Structure: The general structure of the helmet is low in weight and robust in nature. The oval-shaped helmet is made of Polycarbonate thermoplastic polymer, which is resistant to impact and protects your head in an accident.
- Interior: The interior of the helmet is the most essential element that any cyclist will examine. The IS-Cruiser is powerful on the outside and comfortable on the inside, thanks to the materials employed in its construction.
- Visor: Peripheral vision is one of the primary reasons that bikers choose half helmets over full-face helmets. When wearing a full-face helmet, there is a significant problem with peripheral vision, which may be both unpleasant and distracting when driving.
4. Bell Pit Boss Helmet
- Comfort that is ultra-lightweight
- The triple matrix outer shell is extremely durable.
- Chin strap that is both comfortable and easily adjustable
- There is no chin bar, no face protection, and no visor.
- There aren’t any extra ventilation ports.
- If you wear glasses, the sun visor does not work properly or fits properly.
You can tell the difference the moment you put on the Pit Boss helmet for the very first time. The ultra-lightweight TriMatrix structure lowers the overall weight to a bare minimum while yet meeting stringent DOT requirements.
The Bell Pit Boss is also equipped with Bell’s revolutionary Speed Dial adjustable fit system, which delivers unrivaled levels of comfort while significantly minimizing the tendency for open face helmets to lift off the head during play. The Pit Boss truly reigns supreme on the open road, thanks to extra features such as a detachable neck curtain and a drop-down sun shield that can be removed.
- Comfort: The Pit Boss’ two shell sizes accommodate more head types than comparable helmets in its price range and class. The washable and antibacterial inside lining is machine washable, and the cushions may be removed and adjusted for maximum comfort. There are no ventilation openings to keep your head cool when riding, but the lack of a visor renders them superfluous.
- Visibility: Because the visor, chin bar, and face shield are not present, you have entire vertical and horizontal peripheral vision. You also get a drop-down sun-shield for brighter days when you’ve forgotten your sunglasses.
- Ventilation: Because there is no visor or chin bar, this helmet provides some of the greatest ventilation of any helmet style available. Naturally, you must protect your lower face and eyes from any harm, but the Pit Boss from Bell is a fantastic choice if you want a helmet that keeps cool all day.
5. LS2 Rebellion Helmet
- The helmet provides excellent ventilation.
- The low-fiber carbon material is extremely long-lasting and safe to use.
- A great fit for the head, the helmet offers a unique blend of historical design and 21st century structure all in one piece of equipment.
- The snap pattern on the headliner may dig into your temples.
- Because of the many vents, the helmet does not properly reduce noise.
- When compared to comparable goods with similar characteristics, it is a touch on the pricey side.
The LS2 Rebellion Helmet, like every true rebel, stands alone and forges its own path. The Rebellion combines retro-cool with a technological edge thanks to its elegant shell composed of high-performance, lightweight Kinetic Polymer Alloy (KPA).
Consider a half-shell motorcycle helmet with ports flow-through ventilation to keep you cool on hot days. When the sun is low in the sky, the short peak and Twin Shield System drop-down sun shield will protect your eyes. The sunscreen itself features a one-of-a-kind, two-stage adjustability: lock it halfway for a little shade or fully open for comprehensive sun protection.
The dual-density EPS meets or surpasses DOT criteria for legal protection in 50 states. The LS2 Rebellion Helmet is completed with a micrometric, fast-release chin-strap and is designed for a simple and seamless installation of Sena’s LS2 LinkIn Bluetooth communication system. If you like to chart your own path, the LS2 Rebellion Helmet was made for you.
- Shell of Kinetic Polymer Alloy: The shell of the helmet has been designed to be incredibly light while remaining extremely robust. This ensures that the helmet does not wear out even on the most difficult terrain or in the worst weather. The low-fiber material also contributes to the helmet’s reduced weight. As a result, the rider does not feel any strain on their head when riding longer distances.
- Flow-Through Ventilation: The flow-through ventilation keeps you comfortable no matter what the weather is like outside. It also allows you to wear it for extended periods of time. Even on the warmest days, the port’s ventilation will allow you to effortlessly rise.
- EPS Liner with Dual Density: The Dual-density EPS liner is designed to prevent the rider from feeling the jerk during heavier collisions. This shields the helmet’s weak areas and increases shock resistance.
Things To Consider Before You Buy Best Half Helmets
Half-helmets with ventilation are intended to be aerated because they only provide protection for the head. A properly ventilated helmet ensures that the cyclist receives adequate air circulation.
This makes for a more pleasant ride and also helps to keep tiredness at bay. The aeration will also help to keep the helmet fresh and free of odors.
2. Material for the shell:
It is the first and most crucial characteristic to check for when purchasing a helmet before making a purchase. The material used for the shell must be durable and resistant to shock effects.
Materials such as hard grade plastic, thermoplastic, fiberglass, and kevlar are utilized to construct the exterior shell, which is both robust and long-lasting. Select a helmet that is made of high-quality shell material that provides many levels of protection.
3. Shape, size, and weight are all important considerations:
As we all know, half-helmets are lighter than full-face, open-face, and modular helmets in terms of weight. Any half-helmet, on the other hand, will weigh somewhere around a thousand grams.
A half-helmet has a conventional form, but it differs in that it either includes or does not include a shield of protection, depending on the manufacturer. When it comes to the actual size, it varies from person to person. Every brand, on the other hand, has its own sizing chart.
When selecting a helmet, make certain that you accurately measure the diameter of your head. Choose a helmet that is the right size for you.
4. Safety and Health Regulations:
Every half-helmet is approved for safety by organizations like the DOT, ISI, Snell, and ECE. DOT and Snell are safety standards established in the United States, whereas ISI is an Indian standard and ECE is a European norm.
Always check to see whether the helmet you choose has a certification stamp on the inside of the helmet. Additionally, it is perfect for selecting a helmet that meets safety requirements because such helmets are subjected to testing throughout the production process.
5. Effortless fit and comfort:
Wearing a well-fitted helmet is usually a pleasurable experience. The helmet’s fit is determined by the difference between the size you measured and the size provided by the manufacturer.
However, like with any new helmet, it will take some time to become used to it, perhaps a week. Additionally, the strap and inside lining of the helmet must be pleasant to wear while wearing it.
6. Type of Strap:
The straps of the helmet are often constructed of high-quality nylon to prevent skin rashes or allergies from developing. Straps are used to keep the helmet in the right position when it is not in use.
Helmet strap locking mechanisms come in a variety of shapes and sizes, including quick-release mechanisms and buckle kinds. Choose a helmet that offers a simple method of securing the chin strap in place.
Additionally, the locking mechanism must not be too slack and must be simple to operate.
7. Shield of protection:
As we’ve seen, a few half-helmets are equipped with shields for further protection. Make certain that the shield protection is transparent and does not interfere with your ability to see while riding.
Do half-helmets provide any kind of protection?
Ans: A half helmet is intended to provide only a little protection to the rider’s head in the event of an accident or other unavoidable catastrophe. However, they are believed to provide protection in collisions when there is a risk of brain injury (36.8 percent).
What is the finest material for a helmet?
Ans: ABS, fiberglass, thermoplastic, and kevlar are some of the materials used to make helmets. Fiberglass is prone to cracking. While thermoplastic provides little strength, kevlar is the hardest and most costly. It is best to get a helmet with DOT/ISI/Snell certification.
Is it painful to wear a half-face helmet for lengthy periods of time?
Ans: Not at all, because it places no weight on your neck and provides adequate oxygenation. In addition, as compared to a full-face helmet, the half helmet is less in weight.
Riding requires the use of a helmet. Riding without a helmet is unsafe and puts our lives in jeopardy.
We have seen many best half-helmet kinds, their benefits, and drawbacks, how to determine the size, and characteristics to consider while purchasing. We have listed the top options available in the market after extensive research on half-helmets.
If you have any doubts you can ask us in the comment section below.