Modular motorcycle helmets are one of the best and most popular types of motorcycle helmets on the market. According to scientific research, Modular motorcycle helmets provide riders with a unique combination of features and qualities, making them more adaptable and comfortable than traditional helmets.
With the face shield up, you can enjoy the fresh air while talking to your riding companions, or with the shield down, you can have full head protection. Simply said, you’ll receive a full-face and open-face helmet in one package.
We’ve done the research for you and put up a list of the top 10 best modular motorcycle helmets to make your decision easier. We did our expert research to choose the best modular helmets for you.
1. AGV Sportmodular Carbon Solid Helmet
- It has a beautiful complete carbon fiber casing as well as a chin guard.
- a large viewport, a cool/warm lining, and more
- It’s a small and lightweight piece of equipment.
- It is quite pleasant to wear, and the visor mechanism is exceptionally effective.
- Suitable for those who wear glasses
- The ventilation and noise suppression are just around average ineffectiveness.
- Many users have complained that the chin strap is mounted too far back.
The AGV Sport Modular Carbon Helmet is nowhere, and it’s ready to accompany you on your journey. The Sportmodular was designed with the AGV Pista GP R in mind, and it has the same level of protection and lightweight construction.
The helmet liner is two-sided and reversible, allowing you to choose the level of comfort that is most comfortable for you depending on the conditions. The Pinlock 120 insert lens, which provides race-level anti-fogging performance at your fingertips, is compatible with the GT3 face shield. The metal hardware on the chin bar ensures that the bar is securely closed. Replace the face shield in seconds without the use of a tool.
- Safety: When it comes to modular helmet safety, two components must be considered: the helmet shell and the chin guard.
- Ventilation: In the shell of the SportsModular, there is a single chin vent, a single crown vent, and a single exhaust vent.
- Visor and Sun Visor: It must have a huge vertical and horizontal vision. Vertically for racing tucks and horizontally to check who’s sliding up on the inside to block past you!
2. Scorpion EXO-AT950 Helmet
- Kwikfit cheek pads make it simple to put on and take off the most popular models of eyeglasses.
- The flip-up chin bar is simple to operate, and it can be lifted or lowered with either hand without any difficulty.
- Pockets for speaker systems in communication systems
- Removable block-off plates are supplied for when the helmet’s visor is not being used.
- Metal visor hardware with a folding design
At speeds beyond 35-40 mph, the visor causes horrible buffeting.
Scorpion has reinvented a sector by combining the finest of touring and off-road helmets. The Scorpion EXO-AT950 Helmet is a helmet’s Swiss Army Knife. The off-road peak and wide eye port deflect roosts, protect the sun, and let you wear goggles while tearing up the terrain.
Everclear anti-fog face shield and Speedview drop-down internal sun visor keep your eyes clear and ready for whatever comes next. The peak visor may be simply removed for a more aerodynamic profile on the highway. Comfortable eyeglass compatible cheek pads and a KwikWick II lining.
- Ventilation: There’s a big three-way slider on that single chin vent. The shield is completely closed when it is fully up; one down vents the rear of the shield, and fully down sends air to the face.
- Face Shield: It’s broad for decent peripheral vision, and it’s deep for a nice look down while you’re standing on the pegs.
- Goggles and Peak: The shell’s back shape has a molding that’s meant to hold your goggle strap in place, so it should remain put as well.
3. Shoei Neotec 2 Helmet
- The new airtight window beading draws water away from the helmet and prevents it from entering.
- Contains a Pinlock EVO fog-insert lens for further protection.
- Noise management and aerodynamics are improved with the new shell design.
- Included is a breathing apparatus.
- Noise management and aerodynamics are improved as a result of the improved shell form.
- Closure and release are both quick and smooth.
- It’s comfortable and simple to adjust.
- The weight of the helmet is quite heavy.
A modular touring helmet that gets better, the Shoei Neotec 2 helmet. Upper air intake vents have exhaust ports for better flow. The Neotec 2’s aerodynamics were tested in a wind tunnel in various riding positions. In addition to the chin bar Aero Deflector, the integrated shell spoiler is relocated to minimize lift and drag.
A tiny ratchet chin strap secures and removes the helmet quickly. Noise Isolator cheek pads help keep turbulent air out by improving the helmet’s neck seal. A multi-piece EPS liner consisting of various densities of foam absorbs impact energy. The Shoei Neotec 2 is intended to work seamlessly with the Sena SRL Communication System.
- Aerodynamic Shell Design: Extensive wind tunnel testing optimizes aerodynamic characteristics. 2-layer EPS lining for better impact absorption and breathability. Four shell sizes and five liners allow it to comfortably suit most head sizes from XS to XXL.
- Sun Shield System: The QSV-1 inner sun shield provides rapid glare reduction. ANSI Z80.3-2010 non-prescription eyewear standard. A large sliding switch activates the inner sun shield.
- Ventilation System: Shoei’s wind tunnels revealed the perfect combination of airflow and quiet. A large lower vent shutter for riding gloves improves airflow when riding.
4. LS2 Valiant Helmet
- Face shield that is Pinlock-ready, with a Pinlock insert supplied.
- The chin curtain is included.
- Cheek pads that have been laser sliced
- Chinstrap made of steel with a quick release buckle.
- The helmet comes with a neck roll.
- Dynamic Flow-through Ventilation maintains a steady flow of air Versatility, which lets the rider switch between a full face and a 34 open face helmet with relative ease.
- The noise level is high with this helmet
- The pockets for the speakers are small.
The Valiant is the thinnest and lightest helmet of its kind on the market thanks to the LS2 designers’ innovative 180-degree flip mechanism. In chilly conditions, wear it as a full face. Reverse the chin bar to chat with your pals. Use it as a 34 open-face helmet to warm up. No matter how you set it, you receive a Pinlock-ready face shield and LS2’s Twin Protection System internal sun shield.
The FogFighter fog-resistant shield is optically accurate and scratch-proof. Thermo-Form liner in the comfort cushioning. A thermoform utilizes heat and pressure to join two foams together. This eliminates the need for glues and other chemicals and keeps the cloth breathable. The lining is hypoallergenic and detachable. Fully adjustable dynamic ventilation keeps you cool and comfortable. The quick-release chin strap ensures a comfortable fit. The Valiant is LS2 SENA Bluetooth ready and DOT compliant.
- Ventilation: There’s a handy chin vent with a two-way slider that allows air to flow behind the visor. Lastly, the helmet has a crown vent that draws air through the shell and pushes it into channels inside the helmet to cool the top of your head.
- Face Shield: The Valiant’s shield is an optically accurate class A shield. It features a ratchet mechanism and the opening tab is in the middle, which might take some getting used to.
- Sun Visor: The Valiant has a helpful drop-down sun visor that is actuated by a slider along the bottom left rim of the helmet.
5. Shark EVO One 2 Helmet
- The chin curtain has a reinforced magnetic fastening system.
- Aerodynamic profile with a tight radius of curvature
- Reduction in the amount of airborne noise
- A new side plate design has been introduced.
- A chin buckle with two D-rings.
- Chin curtain with an integrated chin curtain
- Suitable for those who wear glasses
- The cheek pads are constricted.
- The Shark’s flip visor is a touch odd and difficult to open and close.
The Shark EVO One 2 is a full-face and open-face helmet in one. Most chin bars do not adjust to your demands like the Shark EVO One 2. Its main purpose is to capture wind and throw off the helmet’s equilibrium. The EVO One 2’s chin bar rotates from front to back, keeping the helmet light and clear of the wind.
Unlike the preceding Shark Evoline 3ST’s single shell, the injected thermoplastic resin shell comes in two sizes.
- Safety: The Shark Evo-One 2 has been safety tested and approved by the SHARP helmet testing labs in the United Kingdom.
- Ventilation: A single external chin vent opens/closes the chin/shield ventilation. The chin guard has another vent hole to send air towards the shield for defogging or away from the mouth. Warm air exits the helmet directly behind, via an exhaust below the spoiler on the top of the helmet.
6. Schuberth C3 Lite Helmet
- The shell has been aerodynamically optimized to increase downforce while simultaneously decreasing buffeting.
- 84 dB(A) inside helmet sound levels at 60 mph have been decreased. A micro-lock ratchet chin strap has also been included.
- On the neckroll, there are large reflective panels.
- The face shield ratchet mechanism has been improved.
- The helmet has an integrated sun visor
- The helmet’s latches were exceedingly difficult to use.
For all its simplicity, the C3 Lite is nonetheless premium. The C3 Lite Helmet is as revolutionary as the C3 Pro but at a fraction of the cost.
The Schuberth C3 Lite Helmet is made of strong fiber and is extremely quiet. The C3 Lite is directionally stable and has an incorporated spoiler to reduce buffeting. The streamlined venting design delivers adequate airflow with a rear exhaust vent that keeps the helmet cool.
- Acoustics: A silent helmet indicates active motorcycle safety. This allows the rider to focus on riding, especially at high speeds. The C3 Lite is as silent as Schuberth could make it in the acoustics wind tunnel.
- Outer Shell: The Schuberth C3 Lite outer shell is available in four sizes and provides great protection. Due to the compression molding method used by Schuberth, it is extremely stable and light.
- EPS: Modular EPS foam liner for maximum shock absorption. This intricate division ensures better force distribution.
7. Simpson Mod Bandit Helmet
- Removal of the shield without the use of a tool
- The liner that is removable and antimicrobial
- Sunshade on the inside of the vehicle
- Pockets for an integrated speaker and a boom mic
- Chin vents that may be adjusted on both sides
- Top and back ventilation is provided.
- Chin noise and air dam are detachable.
- The helmet is a little noisy.
Simpson’s Mod Bandit helmet takes the touring Ghost Bandit to the next level. The Mod Bandit has the same design elements as the original Bandit but with the touring comforts of the Ghost Bandit. The lightweight, aerodynamic shell is completely vented for optimum airflow when you need it. A drop-down sun visor and integrated speaker and microphone pockets make installing your preferred communication device as simple as turning a button.
- Safety: The Mod Bandit is DOT-certified in the United States and ECE-certified in Europe.
- Ventilation: The six side slots remain open at all times, but the front two may be closed from behind.
- Shield: The Simpson Mod Bandit’s shield is ratchet-operated and opens with a tab on the left side of the helmet.
8. Bell SRT Modular Helmet
- Construction of a fiberglass composite shell that is lightweight.
- Anti-bacterial inside that is removable and washable
- Inner sunshade that may be lowered
- Panovision face shield with first-class optical performance
- EPS speaker pockets that are recessed
- Compatibility with eyewear
- The helmet makes little noise
- The upper vent makes a rattling sound.
An elite helmet maker created the Bell SRT Modular Helmet for individuals who may never race, but need their helmets to function. A flip-up chin bar, speaker pockets, and eyewear compatibility combine with a fiberglass composite shell to push the limits of a modular helmet. A touring helmet infused with performance, the Bell SRT Modular Helmet may not get you to the track, but Bell’s heritage of outfitting world-class athletes pervades its design.
- Ventilation: The chin guard has two vents to let air into the chin region and up onto the shield’s rear.
- Looks and Graphics: At the time of writing, there were three graphical choices. There is a gloss white, gloss black, and matt black option for a solid color.
In terms of design, the HJC i90 Modular Helmet is a straightforward touring helmet with a polycarbonate shell, air-flow ventilation, and an integrated sun visor. While riding for lengthy periods of time, the SuperCool moisture-wicking lining technology ensures your comfort. Glasses may be worn comfortably in a specific groove around the temples so that you can see well even if you don’t have perfect 20/20 vision.
- Improved visibility by +10mm because of the aerodynamic improved CAD design with a larger eye port
- Upgraded one-touch open/close locking mechanism in the middle.
- The ACS Advanced Channeling Ventilation System, which has seven intake vents and two exhaust venturi vents in the rear spoiler, is a channeling ventilation system that uses advanced channeling technology.
- The chin bar vent distributes air across the face shield, which helps to reduce shield fogging.
- The SuperCool moisture-wicking inside is made from superior anti-bacterial and quick-drying fabric.
- The crown and cheek cushions are completely detachable and machine washable.
- Riders who wear eyeglasses will be accommodated by the glasses groove.
10. Sena Outrush R Bluetooth Helmet
- Shell made of polycarbonate
- EPS liner with a variety of densities
- Internal sun visor that can be lowered.
- The liner is removable, washable, and quick to dry
- Vents on the top and under the chin
- The exhaust port on the back
- Chinstrap with a quick-release mechanism
- DOT and ECE certifications are available.
- The plastic shell and chin bar portions are still a little squeaky.
- There is no provision for a Pinlock insert or a shield that is fitted with a Pinlock.
The Sena Outrush R Modular Helmet is ideal for Monday through Friday work and weekend adventures. This Bluetooth 5.0 helmet has a lightweight polycarbonate shell that removes the need for speaker pads and cords. Just take the helmet and go.
Sena’s sophisticated sound processing removes road and wind noise, making conversations crystal clear. You can connect with other Sena riders or listen to music while tearing through the twisties. By connecting a Bluetooth-enabled smartphone to your Sena, you can use features like navigation, music, and hands-free calling.
- Face Shields: There is no need to fumble with the supplied transparent face shield since it is both scratch and UV resistant. However, the broader top edge and bottom shape with its stylish ‘lip’ have a left and right horizontal platform or tab for quick and simple raising or lowering the face shield.
- Nose and Breath Guard: For individuals who bike in colder areas, this curved pliable component may be simply removed or changed.
Things To Consider Before Buying Best Modular Helmets
The shell material used in a helmet’s manufacture influences both its overall protective qualities and its weight. Instead of fiberglass, many premium modular helmets now include polycarbonate or composite shells with carbon fiber weave. A modular lid’s chin-bar construction and primary shell material should be considered.
Liners are an essential part of every lid. This includes both the EPS shell and the material used to line the helmet. Last but not least, several high-end helmet manufacturers now provide liners with advanced antibacterial and/or moisture-wicking properties.
Features and Amenities
The modular moto lid industry has embraced additions like Bluetooth comm systems and drop-down sun visors. Many helmets also include specialized recesses or ports for aftermarket comms.
While a helmet’s visor may appear to be a common component, visors can differ considerably in important features. The size (field of view) and construction (fog or scratch resistance) of a visor are important (and if it comes with an included pin-lock).
Double D-rings, developed in Rome, have been used to close helmets for over two millennia. Some innovative helmet designers have recently begun employing alternatives to the dual D-ring system, such as ratcheting closures or magnetic FIDLOCK buckles.
A motorcycle helmet needs a big shell and a perfect fit. To save money, several helmet manufacturers use the same shell size. Premium brands tend to provide more shell sizes, allowing for a better fit.
However, even if the chin-bar may be quickly flipped up, ventilation is critical as the chin-bar will be locked down most of the time. So, count the ventilation system’s intake and exhaust openings. Inspect the ports to see if they’re fixed, or if they can be opened
The wind noise a helmet makes at highway speeds isn’t just annoying; it’s damaging your hearing. In recent years, cyclists have been able to communicate intelligibly at speeds above 70mph.
Weight is essential since your neck supports the entire helmet’s weight. Despite locking flip-up chin-bar systems, most modular helmets are as light as full-faced helmets owing to carbon fiber and other weight-saving features.
So, this is the list of the 10 best modular motorcycle helmets along with their features and buying guide. We hope that this guide will help you to choose the best helmet available in the market. If you have any doubts or questions, you can ask us in the comment section below.